Wood Stove Inserts

Woodstove inserts are constructed out of cast iron and are placed inside the opening of the existing masonry fireplace.

These inserts are heavy and more difficult to clean because the job requires the chimney technician to move the inserts out of the fireplace far enough to crawl behind the insert.

Access behind the insert is required to clean inside the fireplace and areas like the smoke chamber and smoke shelf.

A properly lined wood stove insert has a direct connect liner to the top of the chimney— therefore removal of the wood stove is not required and no additional cost is required.

Call Now Get Free Estimate

★★★★★ Excellent · 231 Google reviews

Why It Matters

EPA-certified inserts that cut wood use and cut down on smoke and emissions.
Precise sizing and hearth-clearance checks so your insert heats safely and efficiently.
Professional installation that meets local building and fire code requirements.
Insert options to match any budget, from basic units to high-efficiency models.

Talk to a specialist (833) 244-6639

What Are the Standards of NFPA 211 for Wood Stove Inserts?

1
The chimney must have a properly sized liner that runs the full length of the chimney and connects to the stove insert.Installation should always be done by experts who understand all NFPA 211 compliances.
2The connector pipe must maintain minimum clearance (about 2″, or as specified by the manufacturer) from combustible materials.
3
A non-combustible hearth pad for floor protection must extend at least:· 16″ in front of the appliance opening· 8″ to each side· 18″ front and 12″ sides if the door opens vertically
4Vent connector installation should be carried out by professionals, with all joints properly sealed using metal screws or better fasteners.
5An adequate amount of combustion air must be supplied to prevent smoke backdrafting.
6Wood stove inserts cannot be used in factory-built fireplaces unless tested and approved for that use.

Wood Stove Installation Checklist for Virginia Homeowners

Requirement	Compliance Needed?
NFPA 211 Compliant Chimney Liner	Required
Local Building Permit	Usually Required
Minimum Hearth Extension	Required
Clearance from Combustibles	Required
Professional Installation	Strongly Recommended
Final Building Inspection (Post-install)	Often Required

“Should I add a wood stove insert to my fireplace? A wood stove insert is a sealed item stopping a wind draft from removing heat from your home.”

What Should I Expect From A Step In Time Chimney Sweep?

When you hire a professional from A Step in Time Chimney Sweeps for a wood stove insert, you sign up for a stress-free installation or repair, whatever you choose.

Our team has years of experience in completing wood stove installations and repairs without causing any trouble or damage during the process. Wood stove inserts are usually made of cast iron or other heavy materials, which makes it important for trained technicians to carry out the process carefully.

When you hire us for a new wood stove installation, we will make sure it is properly lined and installed, and all the joints are sealed, so your appliance operates with maximum efficiency.

Our team will also conduct some pre-checks, including visual examination, or camera inspection in some cases, of the flue to ensure the interior of the flue is in proper condition. If there is a large amount of creosote accumulation in your chimney, our team will first get the cleaning done and then install the wood stove insert.

All of this happens with a proper assessment and planning, so you never get any surprise costs after the work is finished.

If you are looking for someone to clean or repair your old wood stove insert, we are available to make sure your wood stove insert is properly cleaned and operational. From power sweeping to debris removal, A Step in Time Chimney Sweeps is your partner to keep your chimneys up and running.

Want to know how to book our service? It’s simple! Call +1 (804) 244 – 6639 and schedule an appointment.

Neglecting the Condition of Wood Stove Inserts Is Hazardous

If your wood stove insert is not working properly or needs a repair, neglecting it is the last thing to do. Using a clogged or dirty stove reduces the heating efficiency of your chimney, as the amount of heat produced by the furnace decreases.

It may also lead to early wear and tear of the chimney components. Further, you may find yourself more prone to major hazards like chimney fires and carbon monoxide poisoning.

As you keep using your chimney without frequently cleaning it, an excessive amount of creosote may accumulate in the chimney, which can lead to chimney fires and block the flue, resulting in the leakage of poisonous gases in your home.

To ensure the maximum safety of your family, it is important to get frequent chimney cleaning and inspections and never ignore the signs of repairs needed in your wood stove insert. Contact us today for wood stove inserts cleaning.